Hotels, Offices and Air Conditioning
Our GD233 stand alone CO2 sensor can be used for air quality
monitoring in offices and hotels. We also have a discreet version,
the GD233-H, designed to fit into a wall mounted electrical box,
ideal for room monitoring. For air conditioning systems. The GD231
refrigerant leak detector can be positioned adjacent to FCU’s
in the ceiling space and inside the casing of the compressors
Both these sensors can be connected to a TQ100 Ethernet Converter
and Building Management System making the sensors addressable.
cutting down on wiring and making the sensors suited to larger
installations.
Breweries, Dairies and the Food Industries
The food and drink manufacturing environment incorporates the
use of many gases including carbon dioxide, nitrogen and refrigerants.
These can present a hazard to both plant and personnel if leakage
should occur in terms of explosive, asphyxiant and toxic risk.
Our TQ4300 system can monitor all of these gasses, either as
a single gas monitoring system, targeting specific gasses. A dual
gas system for refrigeration monitoring or with an included Oxygen
or Carbon Dioxide sensors for brewery and food installations.
Alternatively our TQ4200 Leak detector is specifically designed
for Refrigeration Leak Detection. Satisfying F-Gas regulations
for 300kg installations and qualifying under the ECA scheme.
Chemical and Industrial Plants
Chemical plants can be inherently dangerous environments due
to the possible leakage of toxic, asphyxiant or explosive materials
and gases. Prudent deployment of gas detection prevents exposure
to both plant and personnel. Our range of Single point detectors
and control panels can cater for a large range of Flammable and
Toxic gasses.
Warehousing and Storage
For cold storage applications our 4200 or 4300 systems can provide
Freon or CO2 leak detection. Or our TQ 122 series of sensors and
control panels offer Ammonia detection to comply with EN 378 regulations.
In addition Flammable, Carbon Monoxide and Oxygen can be monitored,
using point detectors or a 4300 sampling system for Bulk Storage
applications, such as Coal dust, Carbon Fibres, Grain or Wood
Chip storage.
New Industrial sites on Old Workings and
Land Fill Sites
With many new industrial units being build on old reclaimed landfill
site. Our range of Single point Flammable detectors or Flammable
IR Multipoint systems for larger installations. Will protect against
the flammable hazards, of built up gas permeating through the
ground and collecting in new buildings.
Water Industries
The presence of generated methane along with associated hydrogen
sulphide and oxygen deficiency are monitored on sewage works to
give early warning to personnel working in the vicinity. Chlorine,
ozone and ammonia in water installations also present a toxic
hazard and require continuous monitoring. In- situ infra-red gas
analysers, continuously monitor the methane content in digester
gas.
The GD129 sensor or the TQ122 range of sensors for gas detection
are highly reliable and cost effective. They each output at 4/20mA
and are compatible with the TQ4000 and TQ8000 control systems
although being 4-20mA output devices they are compatible with
other PLC's. The GD129 uses highly reliable infra red technology.
This system is very cost effective and provides a highly reliable,
easy to maintain gas detection system.
Subterranean Car Parks
The build up of Carbon Monoxide and Carbon Dioxide in subterranean
car parks can pose a serious risk to personnel. However running
ventilation systems constantly is very costly.
TQ systems offer highly reliable and extremely accurate systems
to detect these levels which can then be used to activate and
deactivate forced ventilation systems, thus improving efficiently
and reducing cost. TQ 122 sensors and control panels can cope
with any size installation.
Further information
For further information on any of these areas, please contact
our Sales office or Engineering department for technical information.
Alternatively please see out products page if you already have
a solution
|
